DIN 1.2436 SKD2 AISI D6 Tool Steel

Application

Typical applications for AISI D6 tool steel include blanking and shearing tools, drawing tools, drawing dies, mandrels, press tools, forming tools and shear blades. AISI D6 tool steel is suited to applications where maximum wear resistance is required.

Quality Standard

-ASTM A681 Standard Specification for Tool Steel Alloy.

-BS EN ISO 4957-2000 Tool Steel.

-JIS G4404-2006 for Tool Steel.

Steel Grades

ASTM                             DIN                               JIS                             GB/T

D6                                1.2436                          SKD2                        Cr12W

Chemical Composition(%)

Heat Treatment

Annealed: AISI D6 tool steel is supplied in the annealed and machineable condition. Re-annealing will only be necessary if the tool steel has been forged or hardened by the toolmaker. To anneal heat to 800-840°C and slow furnace cool. Hardness after annealing will be approximately 225 brinell.

Capacity

1,000 ton per month.

Test

Chemical analysis, Mechnical analysis, Ultrasonic testing, Metallographic, Straightness, Surface quality and dimension report.

Package

Each bundles of max 3,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips.

Mill’s Test Certificate

EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.