Delivery Condition：normalised and tempered/softened
SCM415 whose surface are processed through carburizing hardening treatment are used for the parts which need high toughness or wear resistance, such as cylinder piston, crankshaft, gears, pin, shafts and so on.
SCM415 Steel is a high quality Quenched and Tempered Alloy Structural steel, It belong to the high quality medium carbon, Oil Quenched & Tempered Hardenss is 28-34 HRc.SCM415 Annealing delivery hardenss less than 250HB.
Diameter : 80 to 600 mm ;
Length : 1000 to 9000 mm ;
1. High Quality, Reasonable Price
2. Over 40 Years Experience
3. ISO NQA Certificated Factory
4. Worldwide shipping
5. Emergency Orders and Fast Delivery
Chemical Composition(JIS G4051)
SCM415 steel is a alloy structural steel. It is used for engineering structural, like high tensile shafts, bolts and nuts, gears, pinions and spindles. Locomotive traction with the big gear, supercharger drive gear, pressure vessel, rear axle, gear load of connecting rod and a spring clip,SCM415 can also be used to under 2000 m deep well of oil drill pipe joint and the fishing Alloy, and can be used for bending machine mould, etc
1. High strength in room temperature and elevated temperature.
2. High notch tolerance.
3. Simplified design for bolting configuration
Annealing: 850℃ Furnace Cooling
Normalization: 850~900℃ Air Cooling
Hardening: 850~900℃ 1st Oil Cooling, 800~850℃ 2rd Oil Cooling
Tempering: 150~200℃ Air Cooling
Tensile strength (kgf/mm²): ≧85
Elongation (%): ≧16
Cross section reduction rate (%): ≧40
Impact value (J/cm2): ≧7
Hardness (Hb) : 235~321
1 Hot rolling process
2 Hot Forging: Electro-hydraulic; High-speed-hydraulic; Oil-hydraulic; Precision-forging
1 +A: Annealed (full/soft/spheroidizing)
2 +N: Normalized
3 +NT: Normalized and tempered
4 +QT: Quenched and tempered (water/oil)
1 Black Surface
2 Grounded: Bright but rough ; Not precision
3 Machining for plate: Bright and precision; Little turning scar
4 Peeled/Turned: Bright and precision; Little turning scar
5 Polished: Very Bright and precision size; Not turning scar
1 Cutting: Small pieces
2 CNC Machine: Produce as your drawing
3 Package: Bare/Nylon/Canvas/Wooden
4 Payment:T/T, L/C, O/A(request credit)
5 Transport:FOB/CFR/CIF/DDU/DDP (train/ship/Air)
EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.
If you want to know more or have any questions about our products, please feel free to contact us by phone or email.