SCM435 Alloy Steel Round Bar

SCM435 Alloy Steel Round Bar

Categories:Steel Bars

Model No.:SCM435

Delivery Condition:normalised and tempered/softened

DETAIL INFORMATION

SCM435 Alloy Steel

 

Grade : SCM435     

Classification: Structural steel Chromium molybdenum steel     

Standards: JIS G 4053 : Low-alloyed steels for machine structural use  

 

Our supply size :

Diameter : 80 to 600 mm ;

Length : 1000 to 9000 mm ;

 

Our advantage :

1. High Quality, Reasonable Price

2. Over 40 Years Experience

3. ISO NQA Certificated Factory

4. Worldwide shipping

5. Emergency Orders and Fast Delivery

 

Equivalent steel grade

GB

ASTM/SAE/AISI

DIN

SCM

35CrMo

4135

34CrMo4

SCM435

 

Chemical composition % of grade SCM435

C(%)

Si(%)

Mn(%)

P(%)

S(%)

Cr(%)

Mo(%)

Cu(%)

0.33-0.38

0.15-0.35

0.60-0.85

≦0.03

≦0.03

0.9-1.2

0.15-0.30

≦0.3

 

scm435 steel is a Chromium-Molybdenum through-hardening steel of medium hardenability. It is a general purpose high-tensile steel with medium strength level and good impact properties.

 

Application

scm435 steel bar is mainly used to produce high strength stud bolt, Threaded Rods , wind power bolt, pre-stressed anchor bolts, post stressed anchor bolt, Steel Tie Rod , tie bar, tension rod, Tension Bar etc. Shaft, axle shaft, crankshaft, shaft for sleeve, linear shaft, pump shaft, rotor shaft, sensor shaft, spline shaft, drive shaft, mandrel shaft, transmission shaft, screw rod etc. CNC machines, precision CNC machines etc. Ejector pins and Ejector rods.

 

Quenched and tempered properties:

Yield strength of scm435 steel: 930MPa min

Tensile strength of scm435 steel: 1080MPa min

Elongation of 34CrMo4 steel: 12% min

Reduction area of scm435 steel: 50% min

Rockwell hardness of scm435 steel: 32HRC min

Brinell hardness of annealed scm435 steel: 217HB max

 

Forming Option

1 Hot rolling process

2 Hot Forging: Electro-hydraulic; High-speed-hydraulic; Oil-hydraulic; Precision-forging

 

Heat-treatment Option

1 +A: Annealed (full/soft/spheroidizing)

2 +N: Normalized

3 +NT: Normalized and tempered

4 +QT: Quenched and tempered (water/oil)

 

Surface Option

1 Black Surface

2 Grounded: Bright but rough ; Not precision

3 Machining for plate: Bright and precision; Little turning scar

4 Peeled/Turned: Bright and precision; Little turning scar

5 Polished: Very Bright and precision size; Not turning scar

 

Other Services

1 Cutting: Small pieces

2 CNC Machine: Produce as your drawing

3 Package: Bare/Nylon/Canvas/Wooden

4 Payment:T/T, L/C, O/A(request credit)

5 Transport:FOB/CFR/CIF/DDU/DDP (train/ship/Air)

 

Mill test certificate

EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.


Products Related

Enquiry

Company*

Name*

Phone

Email*

Want to know more?

If you want to know more or have any questions about our products, please feel free to contact us by phone or email.


Tel:86-21-35316960
Email:admin@shunitesteel.com