AISI 1010 / S10c Carbon Steel Tube – Mechanical Tubing – Seamless Steel Pipe
1020 / S20C Hydraulic Cylinder Tube , High Precision Skiving Pipe – Honed Steel Tubing
27SiMn seamless cold drawn steel tube, with black annealed out surface
4145H Modified Alloy Steel Round Bar, Hot Rolled Steel Bar
AISI 4130 75K P+X Alloy Steel Bar
Categories:Steel Bars
Model No.:AISI 301
Surface condition:Black, Blasted, Turned, Polished
301 is an austenitic chromium-nickel stainless steel. This alloy is nonmagnetic in the annealed condition,but becomes magnetic when cold worked. Within the scope of the ASTM 301 pecification, chemical composition and processing moditications can result in a wide range of engineered material properties targeted at specific applications. 301 is available in the annealed as well as a variety of temper-rolled conditions.
High strength and excellent corrosion resistance make 301 Stainless Steel useful for a wide variety of applications.Typical uses include aircraft structural parts,trailer bodies, diaphragms, utensils, architectural and automotive trim,automobile wheel covers,roof drainage products, tablewear, storm door frames,conveyor belts,sinks,subway cars and appliances.
Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
BS | En | No | Name | ||||
301 | S30100 | 301S21 | - | 1.4310 | X10CrNi18-8 | 2331 | SUS 301 |
% | Cr | Ni | C | Si | Mn | P | S | N | |
301 | Min: | 16 | 6 | - | - | - | - | - | - |
Max: | 18 | 8 | 0.15 | 1.00 | 2.0 | 0.045 | 0.030 | 0.10 |
Grade/Temper | Tensile Strength | Yield Strength 0.2% | Elongation -% in 50 mm (min.) |
301 1/4 | 125 | 75 | 25 |
301 1/2 | 150 | 110 | 18 |
301 Full Hard | 185 | 140 | 9 |
Stainless 301 Stainless Steel exhibits corrosion resistance comparable to Stainlesss 302 and 304 in most mild service conditions.Resistance to food service requirements and atmospheric corrosion is excellent. Stress cracking resistance is similar to Stainless 304.The optimal corrosion resistance is obtained in the cold worked then annealed condition. When Stainless 301 is heated or cooled slowly through a temperature range of 800-1600 F(427-871C) without subsequent annealing, it may undergo carbide precipitation that may result in intergranular corrosion.
The maximum temperature to which Stainless 301 can be exposed continuously without appreciable scaling is about 1600 F(871C). For intermittent exposure,the maximum exposure temperature is about 1450 F(788 OC).
Stainless 301 is non-hardenable by heat treatment.
Annealing:Heat to 1900-2050 F(1038-1121 C),then water quench.
Stress Relief Annealing:Heat to 500-900 F(260-482C),then air cool.
High hardness and strength for structural applications are achieved through cold working. In addition to the annealed condition 110 ksi.(758 MPa)minimum tensile strength,Stainless 301 strip is normally produced in various cold-rolled tempers up to full hard 185 ksi.(1276 MPa)minimum tensile strength.
Stainless 301 can be readily formed and drawn.Due to its high work-hardening rate,intermediate annealing may be necessary for severe drawing and forming operations.Stainless 301 may not be suitable in certain severe forming applications where multiple forming operations are required.
If you want to know more or have any questions about our products, please feel free to contact us by phone or email.