AISI 1010 / S10c Carbon Steel Tube – Mechanical Tubing – Seamless Steel Pipe
1020 / S20C Hydraulic Cylinder Tube , High Precision Skiving Pipe – Honed Steel Tubing
27SiMn seamless cold drawn steel tube, with black annealed out surface
4145H Modified Alloy Steel Round Bar, Hot Rolled Steel Bar
AISI 4130 75K P+X Alloy Steel Bar
Categories:Steel Bars
Model No.:35CrMoV
Size: 10-600mm
Length: as your request.
Delivery condition: hot rolled/normalized/quenched&tempered..
Surface: black/peeled/turned/grinding..
35CrMoV Alloy Steel Bar
35CrMoV used after tempering, in heavy or medium-sized machinery manufacturing industry, used to manufacture important parts working under high stress, such as turbine impeller working under 500-520℃ for a long time, rotor of advanced turbine blower and compressor, cover plate, shaft plate, generator shaft with little efficiency and parts of powerful engine, etc. Hardenability and high temperature strength are better than 34CrMo steel, and the impact value can be improved by water-oil quenching heat treatment. Creep strength and lasting strength at 550 ℃ are more than 34CrMo, but after 5000h aging, the mechanical properties drop sharply. Used for rotors, impellers, generator ring forgings and other important parts and gears working under high stress at working temperatures below 500-520 ℃.
Nickel Chromium Molybdenum Steels for Machine Structural use
Structural Steels with Specified Hardenability Bands
This steel is used after tempering, in heavy or medium-sized machinery manufacturing industry, used to manufacture important parts working under high stress, such as turbine impellers working under 500-520℃ for a long time, rotors of advanced turbine blowers and compressors, cover plates, shaft plates, generator shafts with little efficiency, and parts of powerful engines.
C(%) | Si(%) | Mn(%) | Cr(%) | Mo(%) | V(%) |
---|---|---|---|---|---|
0.30-0.38 | 0.17-0.37 | 0.40-0.70 | 1.00-1.30 | 0.20-0.30 | 0.10-0.20 |
Proof strength | Tensile strength | Impact energy | Elongation at fracture | Reduction in cross section on fracture | As-Heat-Treated Condition | Brinell hardness(HBW) |
---|---|---|---|---|---|---|
636(≥) | 378(≥) | 23 | 42 | 12 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 314 |
Property | Density | Temperature T | Specific heat | Thermal conductivity | Electric resistance | Modulus of elasticity | Expansion rate |
---|---|---|---|---|---|---|---|
186(≥) | 824(≥) | 24 | 23 | 14 | Solution and Aging,Annealing,Ausaging,Q+T,etc | 314 | |
Temp. | Creep strain limit | Creep rupture strength | |||||
758 | 226 | 228 |
Product type | Products | Dimension | Processes | Deliver Status |
---|---|---|---|---|
Plates/Sheets | Plates/Sheets | 0.08-200mm(T)*W*L | Forging,hot rolling and cold rolling | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Steel Bar | Round Bar,Flat Bar,Square Bar | Φ8-1200mm*L | Forging,hot rolling and cold rolling,Cast | Black,Rough Turning,Shot Blasting, |
Coil/Strip | Steel Coil/Steel Strip | 0.03-16.0x1200mm | Cold-Rolled&Hot-Rolled | Annealed,Solution and Aging,Q+T,ACID-WASHED,Shot Blasting |
Pipes/Tubes | Seamless Pipes/Tubes,Welded Pipes/Tubes | OD:6-219mm x WT:0.5-20.0mm | Hot extrusion,Cold Drawn,Welded | Annealed,Solution and Aging,Q+T,ACID-WASHED |
If you want to know more or have any questions about our products, please feel free to contact us by phone or email.